SN95 / New Edge Mustang OEM+ Full Angle Kit (94-04)



More info

All of our Mustang steering angle components, assembled into one package!

Take your Mustang's steering angle to the next level with our OEM+ Angle Kit. This setup is one of the best values on the market for drift Mustang steering angle improvements by essentially doubling the amount of available angle compared to factory, all while maintaining an OEM look and feel to your car.

In our testing, the factory Mustang steering angle maxes out around 27*. With the addition of our OEM+ Angle Kit, your Mustang can achieve 50* + of steering angle! The kit is modular and can expand for further steering angle as your drifting skills improve by exchanging the modified OEM lower control arm with our fully fabricated high clearance version that is coming soon! 

The full OEM+ Mustang Drift Steering Angle Kit Includes:

-Steering Knuckle Modification Service

-Core Exchange Program (optional)

-New MOOG Front Lower Control Arms with new bushings and balljoints

-Lower Control Arm Modification Service

-1" Wheel Spacer Set 


This is a bolt on solution that requires little to no trimming of your front bumper for additional wheel clearance like some other kits. Trimming of the front K-Member is required at the spring perch area, and as such coil over front suspension is highly recommended. Sway bar provisions are removed from the lower control arm with our modification and sway bar removal is recommended for maximum angle. 600 Lb/In front springs are recommended to offset this. SN95 and New Edge platforms can benefit greatly from an aftermarket bump steer kit (sold separately).

Steering Knuckle Modification Service:

This service takes your factory steering knuckles to the next level by adding significantly more steering angle while also increasing the steering quickness. All knuckles are media blasted, cut, ground, and fit into a jig before being TIG welded by our experienced fabricators, and come painted black. Our modified knuckle geometry features ~ 1/4” of bump steer correction compared to OEM and is set up to provide a small amount of positive Ackerman (toe out) at lock. Through our experience and testing, we have found that these features provide the best combination of steering feel, angle, and grip.
Core Exchange Program:
For your convenience, you may select to take advantage of our core exchange program in order to keep your car mobile until you receive our products. We source a set of knuckles identical to yours to modify and send to you. Once you remove your existing OEM knuckles, you send them to us and we issue you a refund of $100. Your cores must be returned within 60 days in order to receive refund. Please select your type of knuckle and whether you will be sending us your knuckles to modify (no core charge) or if we will be using a set of our cores.

Lower Control Arm Modification Service:

We start with brand new MOOG SN95 style lower control arms, and clearance them for more articulation of the tie rod. After we clearance the factory arms, a gusset plate is TIG welded into position to reinforce the balljoint area. The arms are pocketed specifically for tie rod clearance of OEM balljoints and aftermarket bump steer kits. 

Disclaimer/Terms of use: This product/service is intended for off-road / track use only. Detroit Drifting Company LLC assumes no liability and will be held harmless for any injury, damages, or loss to persons or property resulting from the use of these products.

Modification service lead time is about 1-2 weeks.


No customer comments for the moment.

Write a review

SN95 / New Edge Mustang OEM+ Full Angle Kit (94-04)

SN95 / New Edge Mustang OEM+ Full Angle Kit (94-04)

Write a review

8 other products in the same category: