All of our Mustang steering angle components, assembled into one package!
Take your Mustang's steering angle to the next level with our OEM+ Angle Kit. This setup is one of the best values on the market for drift Mustang steering angle improvements by essentially doubling the amount of available angle compared to factory, all while maintaining an OEM look and feel to your car.
In our testing, the factory Mustang steering angle maxes out around 27*. With the addition of our OEM+ Angle Kit, your Mustang can achieve 50* + of steering angle! The kit is modular and can expand for further steering angle as your drifting skills improve by exchanging the modified OEM lower control arm with our fully fabricated high clearance version that is coming soon!
The full OEM+ Mustang Drift Steering Angle Kit Includes:
-Steering Knuckle Modification Service
-Core Exchange Program (optional)
-New MOOG Front Lower Control Arms with new bushings and balljoints
-Lower Control Arm Modification Service
-1" Wheel Spacer Set
-SN95 Outer Tie Rods (optional - Fox only)
This is a bolt on solution that requires little to no trimming of your front bumper for additional wheel clearance like some other kits. Trimming of the front K-Member is required at the spring perch area, and as such coil over front suspension is highly recommended. Sway bar provisions are removed from the lower control arm with our modification and sway bar removal is recommended for maximum angle. 600 Lb/In front springs are recommended to offset this. Foxbody platforms require the use of SN95 outer tie rods or aftermarket bump steer kit to ensure proper thread engagement to the inner tie rods.
Modification service lead time is about 1-2 weeks.
No customer comments for the moment.