Ford Mustang Modified Drift Control Arms (1979-2004)

New

Mustang Lower Control Arm Modification Service for more steering angle

More details

$375.00

More info

Squeeze a little more steering angle out of your 79-04 Mustang drift car with our modified factory lower control arms!

We start with brand new MOOG SN95 style lower control arms, and clearance them for more articulation of the tie rod. After we clearance the factory arms, a gusset plate is TIG welded into position to reinforce the balljoint area. The arms are pocketed specifically for tie rod clearance of OEM balljoints and aftermarket bump steer kits. Our modified arms are a fantastic compliment to our modified Mustang steering knuckles. 

For 79-93 Foxbody Mustangs, SN95 style control arms add about 1" to the overall front track width of the car. This facilitates more wheel clearance in the wheel wells for more potential steering angle. We recommend that Foxbody owners use SN95 style outer tie rods or an aftermarket bump steer kit to ensure proper thread engagement on the tie rods.

Disclaimer/Terms of use: This product/service is intended for off-road / track use only. Detroit Drifting Company LLC assumes no liability and will be held harmless for any injury, damages, or loss to persons or property resulting from the use of these products.

Modification service lead time is about 1-2 weeks.


Reviews

No customer comments for the moment.

Write a review

Ford Mustang Modified Drift Control Arms (1979-2004)

Ford Mustang Modified Drift Control Arms (1979-2004)

Mustang Lower Control Arm Modification Service for more steering angle

Write a review

8 other products in the same category: